![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) ![]() |
OK. Well I got a new deck and I'm wanting to install it. I got the wiring harness for the 87up Toyota cars...but it wont go at all...not even close...BUT as I was looking online the GM one for 88up GM cars looks like it will match right up...hmmmm any ideas?
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
![]() |
![]() |
|
Enthusiast ![]() Joined Apr 24, '03 From NYC Currently Offline Reputation: 0 (0%) ![]() |
Well, if you guys wanna reuse the stock amps, Metra does make a harness that works with aftermarket decks with pre-amp outs. It's Metra part # 70-8112
Some people have been able to buy this harness at Best Buys and local stereo shops. Just make sure you ask for it by part # b/c if you ask for a radio harness for a Toyota, the guy will give you the wrong one. |
![]() ![]() |
Lo-Fi Version | Time is now: September 14th, 2025 - 8:25 AM |