![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 23, '03 From New Orleans Currently Offline Reputation: 5 (100%) ![]() |
The spark plug wire set is not allowing me to get the spark plugs out. The thick part that actual goes over the plugs all popped off. They are all stuck ontop of the plugs. How in the world am I suppose to get them off? I've taken a long screw driver and tried to get them up as well as used the wire set itself to try to pull back up. Please help, is there a special tool for this problem or some type of technique. I've already tried our long needle nose but they wont open up in the small area. Thanks
|
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 16, '04 From sydney australia Currently Offline Reputation: 0 (0%) ![]() |
Im not sure if i understand where your sparkplugs are BUT if they are stuck in the top of the motor and you cant get them outta there location try this....
cut a piece of garden hoes aprox 8" long then on one end cut two 1" slits on each side....place the cut end over the plug and press down and your plug will come out.... If your plug is not where i think it is you can use this tip some other time. ![]() -------------------- ![]() 312whp with more to come.... |
![]() ![]() |
Lo-Fi Version | Time is now: September 20th, 2025 - 4:49 AM |