GTFC's "What are these plugs" thread..., Updated to Pics #2 Options

[gtfc115]

people are gonna hate me after all this...

i got my car out of the shop cuz they dont know what's going on. there's a lot of problems with the wiring and i want to get it narrowed down. let me explain the symptoms: first of all, the shop left the main white fuse plug unplugged, so needless to say, they couldnt get power to anything. within an hour of looking around, i figured that out and plugged it in. WHAMMO i got headlights (hi/low) the door chime, locks, lights on the doors, and the guage cluster lights up...thats about it. no sunroof, no power windows, cd player doesnt turn on, no blinkers, no windshield wipers, no fan for the vents. all minor stuff for now, i just want the car to start.

now, when i turn the key to start up, i can hear the circuit opening relay click, but nothing else happens. i had a couple friends over to help out and we ran 12v straight to the starter and the fuel pump relay and got the motor cranking, but there was no spark so it wouldnt start.

so with no power getting to a number of things, i want to go through all the leftover plugs that are layin around to see if they should be plugged into something.

here's the first one. it's probably the EGT sensor. 1 black wire, 1 white wire. it comes out as shown in the 2nd pic.





theres a lot more...i just want to go 1 at a time

thanks a LOT in advance...ive come to find i dont know nearly enough to be doing this swap. shame on me.

This post has been edited by gtfc115: Oct 12, 2005 - 11:15 AM

[celicast3sgte]

make it easier on urself the battery grounds to the chassis like a system would right? ok so just ground the tranny to the chassis too you should just take a 8-4ga wire and run it from where the tranny bolts to the block (with a connector attached) then with a connector on the other end bolt it to the firewall.