 BAD PROBLEMS! |
 Oct 31, 2005 - 8:04 AM
|
 
|
|
Enthusiast Joined Oct 15, '05 Currently Offline Reputation: 0 (0%)  |
I have quite a few problems. First of all, I'm 2000 miles over an oil change, Let's just put that on the table. My problems include:
*rev limiting at 4200 RPM, with MAP unhooked reached 6200rpm but had definite knocks in the pistons (REAL bad timing) *idle shakes like you've never seen before. I mean I'm talkin about like the vibrating beds at the motels that shake vibrate. *I have been gettting EGR CEL engine codes but they've gone away after some re-routing Help me with my celica. I know for a fact that all four mounts need to be replaced (162,000m) that would probably eliminate the shaking. I did also notice that my #1 fuel injector seemed to fit very "loosely". Could a faulty injector be the problem? Help me out 6gC Buds |
 |
Replies
|
Nov 2, 2005 - 1:09 PM
|
|
 Enthusiast  Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
maybe, I dont know, change the oil while you're at it..
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
Posts in this topic
dwg BAD PROBLEMS! Oct 31, 2005 - 8:04 AM
dwg Also, unplugged the O2 Sensor with no noticable di... Oct 31, 2005 - 8:32 AM soulshadow Without the MAP sensor, you will be running either... Oct 31, 2005 - 10:21 AM K-ESD i'm no expert but i'd check the timing bel... Oct 31, 2005 - 12:28 PM Supersprynt Check sparks, plugs, wires, cap, rotor... Nov 2, 2005 - 1:25 PM dwg ok guys... I changed the oil, changed the transaxl... Nov 3, 2005 - 2:41 PM dwg wow thanks for all that useful information! Nov 4, 2005 - 4:30 PM lagos when and how did this 1st start. you said the moto... Nov 4, 2005 - 4:43 PM presure2 well #1 you SHOULD NOT be driving or reving your m... Nov 4, 2005 - 5:28 PM Supersprynt I agree, having ur revs limited is not fuel delive... Nov 4, 2005 - 5:40 PM dwg Right now I have unhooked the exhaust directly fro... Nov 4, 2005 - 6:12 PM mark_426 give us some details about your car, it helps a bi... Nov 4, 2005 - 10:14 PM lagos check your codes...if its the ignitor it will thow... Nov 4, 2005 - 10:43 PM PhillyGuy086 when was the last time if at all the timing belt w... Nov 5, 2005 - 7:57 AM dwg The timing belt cover has been warped and the gask... Nov 5, 2005 - 4:37 PM presure2 like art said, id start with a new cap and rotor, ... Nov 5, 2005 - 5:03 PM
lagos sounds like that migh be your problem ...get a new... Nov 5, 2005 - 5:38 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 12:19 AM |