Rear spoiler LED brake light not working, Wiring hints for making LED work? Options

[ian0]

Hi there,

have owned my 1994 ST202 for nearly 6 years now, and the rear spoiler LED brake light has never worked. I wasn't too bothered, as there are still 5 other brake lights (4 in the tail lights, and the high level one above the number plate, as the car is an import), but I have now decided it deserves to work, as it's sitting there anyway. Does anyone have any hints as to where to look for the wiring, or other things to check to get it working? Also, could it be set up to work as a rear foglight?

Any suggestions welcomed.

[K-ESD]

hmmm... thats interesting
if it does work by sensing current, which would decrease if a bulb was poped since there would be one resistor missing from the paralel node. For diagnostics, try getting ur hands on a variable resistor (like a volume knob off an old stereo) and play around with the resistance to determine what is the range of current which activates the light. Also, stick a ohm meter in the LED circuit to see what kind of resistance you get. I'm sure with enough fiddling around you should be able to solve the problem.

This is somewhat a minor problem, i guess you could just pull the bulb out of the cluster since it bugs you. If worst comes to worst, u'll blow a fuse before ur wires start melting.
I'm curious to see how those Japs wired the thing up

EDIT: i'm still thinking about this one... does ur LED lights come on (but dimmer) with the parking lights? If so, you might've connected the parking light wire to the brake light wire on the LED and vis versa. One other way to find the right resistance is to unlug ur LEDs, take the brake light fuse out and stick an ammeter in there (careful not to short), mesure current and calc resistance. Then do the same with the LED light plugged in, compare data, in theory you should have more current going thru it. If you somehow get less current, then you can figure out what resistor you would need to stick in (paralel) there to up the current by a little bit.

This post has been edited by K-ESD: Nov 2, 2005 - 3:31 PM