May 26, 2003 - 10:08 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 9, '03 From St. Louis Currently Offline Reputation: 0 (0%) |
guys, my engine has been idling rough lately, I am noticing a hissing noise coming from behind the intake manifold, and I have lost a little bit of acceleration, plus a little bit of backfire. Now I know thaT Backfire is caused by leftover fuel that wasn't burned.
so my question is, Is there some kind of sensor calling for more fuel? Is there some kind of vacuum hose loose? any ideas would be helpful oh and I've heard that the check engine light usually relates to pollution control devices in the engine. please help me with any ideas. -Jim -------------------- [img]http://photos-081.facebook.com/n6/081/n15913038_30266081_3342.jpg[/img]
|
![]() |
May 27, 2003 - 5:54 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Oct 27, '02 From Barbados Currently Offline Reputation: 0 (0%) |
yep
But it is kind of strange since the vacuum is needed to add more feel up top as it open the diaphram some more to let more fuel through. I had to block the hose because the car was now getting extra air which made the engine run lean, hence the increase in high idle to compensate for than. But this is the 4age 20v. My advice to him is to him is to check all vacuum hoses. If you have a map sensor, check the host you to that. Again, I am not familiar with the 7afe The check light is relate to problems the ecu is having,. It notify when something is wrong. This post has been edited by west_minist: May 27, 2003 - 6:04 AM |
jayi12-15psi please help May 26, 2003 - 10:08 PM
west_minist Most probably the vacuum hose to the fuel regulato... May 26, 2003 - 10:53 PM
jayi12-15psi whey did you run it with a blocked up vacuum hose,... May 27, 2003 - 1:46 AM
jayi12-15psi Thank you for your help May 27, 2003 - 11:56 PM
jayi12-15psi ok, I located the leaky vacuum hose, and replaced ... May 29, 2003 - 12:48 AM
1bwilson Pull the batt cables and press the brake. Give it... May 29, 2003 - 12:56 AM
edo17982 maybe that's te O2 sensor.
If it doesn't w... May 29, 2003 - 5:16 AM
jayi12-15psi thanks guys, but it does seem like it idles fine a... May 30, 2003 - 1:46 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 12th, 2026 - 5:05 AM |