 interior panel paint |
 Nov 21, 2005 - 4:04 PM
|
 
|
 Enthusiast  Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%)  |
Before this , I painted my interior Silver with clearcoat. IT worked out fine and it did not scratch easily.
This time around, I am painting it back to matt black. I have gone ahead and done it , 400grit ->600grit -> 3 coats Duplicolor Adhesion promoter(primer) -> 3-4coats VHT Enamel interior/exterior paint.  I have left it overnight(12hours~) and it seems that the paint scratches off easily. I do not remember it being that easy last time. Was it the clearcoat that helped? This time around I am going for Matt Black therefore a clearcoat is out of the question.. Should I spray more layers today and let it dry again? This post has been edited by soven: Nov 21, 2005 - 4:08 PM |
 |
Replies
|
Nov 21, 2005 - 4:46 PM
|
|
 Enthusiast Joined Feb 9, '03 From Sioux falls, South Dakota Currently Offline Reputation: 1 (100%) |
you can use a clear coat on matte finsh just buy a matte clear coat.. krylon makes a matte finsh clear.
-Aaron- --------------------  |
Posts in this topic
soven interior panel paint Nov 21, 2005 - 4:04 PM
bloodrain paint 1 layer, let it dry, paint a 2nd layer, let ... Nov 21, 2005 - 4:40 PM soven Can't find any matt clearcoat around here. Doe... Nov 21, 2005 - 5:24 PM afroman the clear is really going to help protect the pain... Nov 21, 2005 - 6:20 PM soven Left it to dry for 2days + now and it feels like t... Nov 23, 2005 - 11:52 PM 95CelicaST have you used clearcoat yet? Clearcoat is what pre... Dec 2, 2005 - 3:58 AM presure2 QUOTE Clearcoat is what prevents scratching and fl... Dec 2, 2005 - 8:17 AM devilsden97 ok not to steal the guys thread, but i have a ques... Dec 2, 2005 - 9:37 AM
soven yank and pull out the passenger air vent. you will... Dec 2, 2005 - 10:00 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 12:43 PM |