May 26, 2003 - 10:08 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 9, '03 From St. Louis Currently Offline Reputation: 0 (0%) |
guys, my engine has been idling rough lately, I am noticing a hissing noise coming from behind the intake manifold, and I have lost a little bit of acceleration, plus a little bit of backfire. Now I know thaT Backfire is caused by leftover fuel that wasn't burned.
so my question is, Is there some kind of sensor calling for more fuel? Is there some kind of vacuum hose loose? any ideas would be helpful oh and I've heard that the check engine light usually relates to pollution control devices in the engine. please help me with any ideas. -Jim -------------------- [img]http://photos-081.facebook.com/n6/081/n15913038_30266081_3342.jpg[/img]
|
![]() |
May 29, 2003 - 5:16 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 21, '02 From Italy Currently Offline Reputation: 0 (0%) |
maybe that's te O2 sensor.
If it doesn't work properly for sure you'll have some air/fuel mixture problems. It checks for the a/f ratio and it require more or less fuel depending of how rich or lean is the mixture. check for it. As Ed said shouldn't be the MAP sensor, also cause if it doesn't work, your idling is fine but as you try to accellerate the engine stalls and can't raise RPMs due to a basic data missing.(it can't read the quantity of air entering in the manifold) Hope this helps!!! This post has been edited by edo17982: May 29, 2003 - 5:20 AM |
jayi12-15psi please help May 26, 2003 - 10:08 PM
west_minist Most probably the vacuum hose to the fuel regulato... May 26, 2003 - 10:53 PM
jayi12-15psi whey did you run it with a blocked up vacuum hose,... May 27, 2003 - 1:46 AM
west_minist yep
But it is kind of strange since the vacuum is... May 27, 2003 - 5:54 AM
jayi12-15psi Thank you for your help May 27, 2003 - 11:56 PM
jayi12-15psi ok, I located the leaky vacuum hose, and replaced ... May 29, 2003 - 12:48 AM
1bwilson Pull the batt cables and press the brake. Give it... May 29, 2003 - 12:56 AM
jayi12-15psi thanks guys, but it does seem like it idles fine a... May 30, 2003 - 1:46 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 14th, 2026 - 1:17 PM |