Oil feed line 7afte (from oilcooler?) Options

[Conwa]

Hi,

im busy building a 7afte engine, but have a question (cant find the answer on this site):

Can i use the return line from my oilcooler to be the feedline of my Turbo, and make the return line from the turbo to my block?

If so, thats nice,


If not, why not????


thnx already,


Conwa

This post has been edited by Conwa: Nov 28, 2005 - 4:17 PM

[Conwa]

Yeah Nik, that thread of yours is the reason for my question.
U did it that way, but isnt my way easier?

What are the downsides of my way making the oil feed and return?

[nik]

Yeah Nik, that thread of yours is the reason for my question.
U did it that way, but isnt my way easier?

What are the downsides of my way making the oil feed and return?

well look at it this way the oil needs to move through that oil cooler and a constent rate to cool it down if you put it to a turbo you need to reduce the pressure so you dont break your turbo seals so why you just slowed down the flow of oil now that oil cooler is pretty useless