7MGE Map Sensor, will this work? Options

[Valo666]

Ok, so im still thinkin of duin a 5sfte kit, and the stupid 3s map sensor is 2 hard/2 expensive to find, but since i used 2 b a part of the supra comunity here in toronto, i have access to any thing that ever came on a supra for cheap. So i was wondering, would a map sensor off a 7MGE or 7MGTE work for the 5sfe turbo setup??..if so i should take a walk over 2 my grandparents place and grab the one on my supra off it.

[dans_st]

if your going 5sfte you can use a gm map sensor off of a 93-94 GMC Typhoon($28 at advance auto parts) I beleive it is a 2bar stock you can also get a 3bar , 2bar should be enough though.
As for the harness you can get it at just about any junkyard that has 81-01 gm vehicles($4-$7) so it's easy to find parts for this
To convert the signal if you need to you can use a SAFC-II or other piggyback to do so. as far as converting the signal I did not need to change anything other than minor adjustments since I have larger injectors

Also if you use the search for <map sensor> you can probably find where I had a topic over it when I first started my project