6G Celicas Forums

Welcome Guest ( Log In | Register )

> T3/T4 Super 60?, Need some help from turbo experts
post Dec 11, 2005 - 2:28 AM
+Quote Post
JoKeRkId613

Enthusiast
*****
Joined Apr 25, '03
From Miami, FL
Currently Offline

Reputation: 9 (100%)




Today, I picked up my turbo. I'm very excited. It's a Garrett Super 60. However, the one I have is a T3/T4 Super 60. I dont know which side is T3 and which side is T4 but the silver snail looking piece says "A/R .60 M11". And on the dark piece that connects to the mani and downpipe says "3" and ".48" somewhere right inside the flange opening. The thing is, I wanted this to be a straight T3 Super 60. Is there any way to convert this to a straight T3? If not, then can someone please post up the compressor map of the T3/T4 Super 60? I can't find it anywhere. I only find the one for the straight T3. How will this turbo do on my little 1.8? Thanks.


--------------------
IPB Image
 
Start new topic
Replies
post Dec 11, 2005 - 3:14 AM
+Quote Post
Dr_Tweak



Enthusiast
*****
Joined Mar 31, '04
From Summerville, SC
Currently Offline

Reputation: 5 (100%)




It's not a T3/T4, I'm not sure why he thinks that. It's a T3 super 60. .48 turbine .60 compressor, M11 housing (T3). At least, it should be. If you take off the compressor housing and measure the inducer wheel you'll know for sure. It should be 1.900". What did you pay for it?

You would only want a T3/T4 if you were planning on running a lot of boost, in the area of 20-25 psi, then it would be the one you want.

-Doc

This post has been edited by Dr_Tweak: Dec 11, 2005 - 3:34 AM


--------------------
-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire
Click here to see my swaps
drtweak@phoenixtuning.com


Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 22nd, 2025 - 12:46 PM