My T3 Super 60, *PICS* *CAUTION: NOT 56K FRIENDLY* Options

[JoKeRkId613]

Garrett.


Can somone tell me what vaccum lines U have to connect to that?


A/R .60 M11.


A/R .48 M4.


I need to know what goes to that aluminum line on the mid-top piece(assuming the oil line).
And also need to know what goes to the mid-bottom piece.


What's an ideal wastegate to put in there(I think that hole there is for the external wastegate.


There's a hole there in the middle and I need to know what that goes to.


That's the little aluminum pipe I was talking about(Is that the main oil line?)


I need to know what goes on that mid-flange and the little fitting on the top of the mid-piece.


And a pic of my log-style manifold just for kicks.


I would really appreciate it if someone could answer some of the questions I asked on here. I'm having a couple buddies help me out with the turbo install(they actually know about this stuff. lol) but I just want to know in advance so I know what I need to get, such as the wastegate, which one's the best?, etc. I will be researchingthis but figured I just ask anyway to be on the safe side. It's easy to say "go search and research", but if you are not auto-mechanically literate, then it can be a bit difficult. Most places talk about turbos like you already know what everything means so it's hard to find a place that talks about things in detail for people like me that don't know all the terminology and such. Thanks for any help.