Driveaxle changeover, Need some advice Options

[Dunners]

Hey guys, Put in a new driver's side driveaxle and took her for a test drive and all seems ok. Although i think it may vibrate a bit more on acceleration but it can barely be noticed. Has this happened to anyone else. Also there were two types, one for abs and one for non abs. The bloke at the store reckons the sx model doesn't have abs although the new one wasn't exactly the same as the old one. Where the axle goes into the wheel the old one had rings around the axle (which i cut my hand on ) But the new one has a ring that has some teeth on it that looks like it may drive something but doesn't go that close to the brake so it doesn't really do anything. I haven't really explained it well, i've started to confuse myself. Thanks guy's.

[lagos]

I've had that problem before with rebuilt axles, it was out of balance. That could be your problem. I personally doubt the ABS ring has anything to do with it.

BTW, the BEST place to get rebuilt axles in the world is www.raxles.com

Make sure you tell them that Dr Tweak from Phoenix Tuning in Vermont sent you! I think the guy's name is Marty. They use all new joints in every axle.

-Doc

how much do they sell them for and do the need a core to be returned?