System update, pics Options

[Clipsetuner]

2 12" Earthquake DBX-12R's (one not installed yet)
2 Power Acoustic LT-980/2 (one not installed yet)
1 Farad AudioBahn Cap
2 Farad Kole Audio Cap (not installed yet)

With this setup its pretty loud but I need to build a box to house it all, thinking of full width between the strut towers, mounting the subs near the strut tower and mounting the caps verticaly inbetween them, and fineally the amps on top.

I reccomend the power cap to anyone running a small system, with this current setup the 1farad cap has solved alot of my dimming and dead battery's at start.

DTE

[danny_t82]

Yeh, good plans, I went for a setup between my towers too cos it leaves plenty of room and can keep the spare wheel. But, even if you can work wonders with fibre glass I think you'll struggle to get the correct box volume in that space even with a sealed enclosure. I recommend using WinISD Beta to help calculate the volume required for your box and how the dimensions will affect their performance. I did some calcs to see if I could get another sub in my setup but found it pretty much impossible without using the whole trunk.

Good luck anyways,

Dan