![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) ![]() |
If there's a topic floating around here I couldn't find it. So sorry if this is a repost.
Anyways... I removed my stock antenna and I'm wondering how I would go about covering it? Should I use fiberglass... or have someone weld it shut? Are there any good resources on how to work with fiberglass? Any help would be appreciated. I also have some holes in my hatch for when I had an aluminum spoiler... lol Thanks. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 20, '03 From Kansas City Currently Offline Reputation: 0 (0%) ![]() |
Nice...I can't believe I missed that topic.
You're obviously going to have to repaint. This is just a thought, but since the hole for the stock antenna is hollow, I would maybe fill it in with a foam spray, and then maybe bondo it. I think fiberglass would take too much work, and if you weld it it would require major sanding. I'm not an expert on this subject, though. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 19th, 2025 - 3:38 AM |