My T3 Super 60, *PICS* *CAUTION: NOT 56K FRIENDLY* Options

[JoKeRkId613]

Garrett.


Can somone tell me what vaccum lines U have to connect to that?


A/R .60 M11.


A/R .48 M4.


I need to know what goes to that aluminum line on the mid-top piece(assuming the oil line).
And also need to know what goes to the mid-bottom piece.


What's an ideal wastegate to put in there(I think that hole there is for the external wastegate.


There's a hole there in the middle and I need to know what that goes to.


That's the little aluminum pipe I was talking about(Is that the main oil line?)


I need to know what goes on that mid-flange and the little fitting on the top of the mid-piece.


And a pic of my log-style manifold just for kicks.


I would really appreciate it if someone could answer some of the questions I asked on here. I'm having a couple buddies help me out with the turbo install(they actually know about this stuff. lol) but I just want to know in advance so I know what I need to get, such as the wastegate, which one's the best?, etc. I will be researchingthis but figured I just ask anyway to be on the safe side. It's easy to say "go search and research", but if you are not auto-mechanically literate, then it can be a bit difficult. Most places talk about turbos like you already know what everything means so it's hard to find a place that talks about things in detail for people like me that don't know all the terminology and such. Thanks for any help.

[playr158]

if i was you i'd just get the needed parts to assemble the internal wastegate....overall it will be better for your setup and you won't come near exceeding the performance abilities of the internal wastegate....that log manifold you have isn't good for external wastegate due to the way it will flow......log manifolds and external wastegates just don't belong together.....