getting 3sgte, want 350+hp Options

[dans_st]

I am purchasing a st185 RC 3SGTE that I am going to pick up in Jan., Basically what can I do to reach 350hp with under $2,000?

I already have a upgraded fuel system, boost controller, and am about to purchase a Greddy E-manage ULTIMATE, I plan on using everything that is on car as I can on my new setup.
I have already recieved another GT32 turbo that I plan on using on the 3S

So basically what can I do to get around 350HP and is my budget high enough to do so?

here is a list on my engines mods. I know ALOT of the parts I won't be able to use but what do i need to reach my goal?

Thanks for all your help guys...

Performance Modifications
////////////////////////////////////
ITS GT32 turbo
3.5" downpipe
HKS SSQV blow-off valve
HKS 65mm BOV flange
2.5" intercooler piping
Apexi SAFC-II version 2
Turbo smart boost controller
Turbosmart 38mm wastegate
Autometer COBALT boost guage
Mishimoto 31"x11"x3" intercooler
KOYO Radiator
KOYO 1.3bar radiator cap
RC engineering 550cc injectors
Walbro 255lph fuel pump
Fuel pressure regulator
port & polish on head
port on intake & throttle body
intake manifold powder-coated black
valve cover powder-coated black
ZOOM clucth
INNOVATE LM-1 wideband O2 with datalogger
fast-turbo oilfilter relocation kit
Goodridge -6an fuel lines from tank
OBX fuel rail
Aeromotive in-line fuel filter
Aeromotive boost dependant fuel pressure regulator
magna flow exhaust
full 3.5" exhaust from manifold
(all Magnaflow 3.5" mandrel bends)
HKS filter
HKS catch-can
MSD sportcompact ignition plus
MSD custom fit 8.5mm wires
MSD Blaster SS coil
NX N-tercooler sprayer w/CF bottle
NX 35 SHOT w/RPM window switch
battery relocation to hatch
8ga. power wire to MSD and Walbro fuel pump
TRD short shifter
all new trans. cables,washers, bushings, ect...

[dans_st]

afroman Posted Today, 09:35 AM
cams would be a good start.
-Aaron-

thanks I considered doing this, what kind of gain could this give me

presure2 Posted Today, 04:02 AM
its gonna cost A HELL of alot more than 2k to make 350+whp on a 3sgte.

I figured with the mods I have on the car already that that would already put me up in the 230-260hp range.
here is what I'm pretty sure I can use that I already have
ITS GT32 turbo
3.5" downpipe
HKS SSQV blow-off valve
HKS 65mm BOV flange
2.5" intercooler piping
Apexi SAFC-II version 2 (have right now- ordered E-manage ultimate yesterday)
Turbo smart boost controller
Turbosmart 38mm wastegate
Autometer COBALT boost guage
Mishimoto 31"x11"x3" intercooler
KOYO Radiator
KOYO 1.3bar radiator cap
RC engineering 550cc injectors ( plan on getting larger RC injectors)
Walbro 255lph fuel pump
Fuel pressure regulator
INNOVATE LM-1 wideband O2 with datalogger
fast-turbo oilfilter relocation kit
Goodridge -6an fuel lines from tank
Aeromotive in-line fuel filter
Aeromotive boost dependant fuel pressure regulator
magna flow exhaust
full 3.5" exhaust from manifold
(all Magnaflow 3.5" mandrel bends)
HKS filter
HKS catch-can
MSD sportcompact ignition plus
MSD custom fit 8.5mm wires
MSD Blaster SS coil
NX N-tercooler sprayer w/CF bottle
NX 35 SHOT w/RPM window switch
battery relocation to hatch
8ga. power wire to MSD and Walbro fuel pump
TRD short shifter

all of this will be on the car , I don't know which turbo manifold I am going to go with probably a equal lenght stainless steel manifold to use with GT32-this is not included in my $2000 budget