 Pulling 7afe, suggestions and tips |
 Dec 19, 2005 - 3:59 PM
|
 
|
 Enthusiast  Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%)  |
Aite well tonight i'm probably goin to pull my motor outta my car and clean the engine bay and paint it..
basically anyone who's done it before have any tips hints suggestions condemnations thank you..... and is there any interest in possibly a motor removal how to? |
 |
Replies
|
Dec 20, 2005 - 1:38 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
if u dont know all the vac lines, harness, etc by heart, lable them before u disconnect . take lots of pics that you can refer to later.
drain the engine and tranny oil. undo the shifter cables and hydraulic lines. doubble and tripple check that everything is disocnnected from the motor before you start to pull it out. get under the car and unbolt the rear motor mount 1st, then the front, then the sides. all while having the lift hooked up . hook up the lift in a way were the motor tilts down at an angel so that there is enought room to clear everything. buy a better motor to put back in there 
This post has been edited by lagos: Dec 20, 2005 - 1:43 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
playr158 Pulling 7afe Dec 19, 2005 - 3:59 PM
nik mark everything befroe disconnecting it maybe also... Dec 19, 2005 - 4:19 PM Kwanza26 and I thought you were all smart and all... Dec 19, 2005 - 5:54 PM JoKeRkId613 yes! make a how-to! im going to need it wh... Dec 19, 2005 - 6:53 PM Clipsetuner QUOTEand I thought you were all smart and all...
... Dec 19, 2005 - 7:23 PM Hanyo make sure you ever so slowly lift the engine out, ... Dec 20, 2005 - 1:45 AM Coomer For the wires on the back of the block/intake mani... Dec 20, 2005 - 1:41 PM
playr158 QUOTE(Kwanza26 @ Dec 19, 2005 - 5:54... Dec 20, 2005 - 2:00 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 28th, 2026 - 2:35 AM |