![]() |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
ok guys, went back to the dyno with the 460cc injectors, and did some runs to see what was up....first couple runs were about the same as before, about 195 or so whp and a little over 210ftlbs...but now it was NICE AND RICH, which i was VERY happy about.
so, i removed a little fuel up top (between 4600-6k) and upped the boost a little bit, to 12lbs. she responded by giving me these runs. after looking at the runs some, you can really see how the power drops off right @ 4450rpm. i think this MAY be one of two things. the SAFCII screwing with my timing, and the ECU making it pull timing to fight back, or just plain ole detonation. now, i havent noticed anything strange as far as readings on the SAFCII, and i havent actually "heard" anything strange, yet. then again, they do say by the time you hear it, its usually to late..lol so, im planning on going back, and trying a few things to see what i can do about the power dropoff. even with it, the car pulls HARD, and by the looks of the egts things are actually safer with the bigger injectors. i really think that if i can figure out the issue i have there above 4400rpm, i should be making about 225whp to go with the 240+ftlbs... any thoughts??? lets hear em! ![]() This post has been edited by presure2: Sep 20, 2005 - 8:44 AM -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 21, '04 From New York City Currently Offline Reputation: 0 (0%) ![]() |
there's no MAF sensor for the 5sfte, manny have went all the way up to 15psi on his set up and it didn't blow anything except breaking a stut lol. i'm pretty sure he knows wat he's doing cause he's the 5sfte pro member
![]() -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jul 7, '04 From charlotte N.C. Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(shin @ Dec 21, 2005 - 6:40 PM) [snapback]369700[/snapback] there's no MAF sensor for the 5sfte, manny have went all the way up to 15psi on his set up and it didn't blow anything except breaking a stut lol. i'm pretty sure he knows wat he's doing cause he's the 5sfte pro member ![]() sorry im thinking 7th gen, well whats the max the AFM on the celica will read? you might want to look at a larger one maybe from a 3s and a EM to run it. as far as blowing out the sparks, do you know what i mean when i say that? the spark on the spark plug actuatly gets blown out. the same way you can blow a match out with a leaf blower. manny what gap are you running on your plugs? how hot are your plugs? and lastly what rpm are you making full boost at? -------------------- Former: 96 GT 5 speed (i/p/e) Fate- rear ended by mack truck
00 GTS 6 speed (i/ Bored TB 63mm - 68.5mm w/ butterfly/ Ported IM/ IMG/ PFC/ Commander/ datalogit/ Ported & heat wrapped Header/ Decat/ UEGO/) 193FWHP 14.2(1/4mi) @98mph, 2.12 60ft (just intake, unbolted Exhaust, and gutted) Fate- side swipped by 18 wheeler at 75mph. Next: maybe an elise |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 3:33 AM |