Power Windows won't work, PLEASE HELP Options

[djultimate]

Yeah, so my power windows (on BOTH door switches) and moonroof don't wanna work. I checked EVERY fuse I could find and they all seem to be in tact. My power mirror switch and the power locks work just fine though. I even tried to manually activate the windows on the circuit board using jumpers and I could get the locks to lock and unlock but the wouldnt budge. I don't know what else to do.

[djultimate]

when I installed the engine start button I had to wire up a switch using the wire from the ignition harness:
White = 12v constant
Black/Orange = Ignition Wire
Grey = Acc
Black/White = Starter

I tapped the Acc and Ignition wires together (so I didn't have to setup 2 switches) and wired the other end to a switch. Ran the 12v constant to the switch as well so when the switch is flipped it's just as if you had your key in the on position. Also, there's a blue and red wire on the ignition harness as well and THAT is the wire that controls the windows, moonroof and wipers! So I tapped that into the ignition and acc wires so that when I flip the switch, all those wires connect with the 12v constant. TA DA!!