![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 18, '04 From Rio Grande Valley, TX Currently Offline Reputation: 0 (0%) ![]() |
I got a custom short-ram intake put into my celi (SE) about three months ago. ever since then, it has been like the car has a hard time taking air in when i turn the car on. it will start but the intake will not start sucking air in right away therefore the rpm's start out very low (about 200) untill i rev it up a little. sometimes revving up the engine will get the intake to breathe, but lately not even that is helping.
I'm thinking that it is an oxygen sensor issue, or maybe a computer issue. but the weird thing is that it didn't start messing up untill after i got the intake (i'm using the original sesnsor and the the original comp settings). does anybody have any ideas as to what might be the problem? and maybe some troubleshooting ideas? -------------------- ![]() this is what happens when your little brother is better at photoshop than you are |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%) ![]() |
Seafoam
EDIT: NAPA usually carries it if you're having trouble finding it. This post has been edited by mikew04: Dec 29, 2005 - 2:00 PM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 2:37 PM |