Wheel Offset Guide, Unsure about proper offset? Look here first. Options

[WannabeGT4]

Ideal Offset in Relation to Wheel Width (standard ride height):
Width - Offset
7.0"-----30mm with 15mm spacer (effectively 15mm) *
7.5"-----31mm with 10mm spacer (effectively 21mm) *
8.0"-----33mm with 05mm spacer (effectively 28mm) *
8.5"-----35mm
9.0"-----42mm (probably too wide no matter what offset)

This will make the rim almost flush with the side of the body. These offsets and offset/spacer combos will prevent the "sucked in look" that the factory wheels have.

Ideal Offset in Relation to Wheel Width (lower ride height):
Width - Offset
7.0"-----36mm with 10mm spacer (effectively 26mm) *
7.5"-----33mm
8.0"-----40mm
8.5"-----46mm *
9.0"-----53mm (probably too wide no matter what offset)

The rim will sit just behind the fender. In order for the rims to tuck into the fender well on lowered cars the the rim must sit back into the wheel well by 11mm compared to the standard ride height offset recommendations.

* Clearance issues prevent the use of most rims with offsets lower than 30mm. The spacer will actually lower the offset and at the same time move the rim away from the offending components.
* 8.5" rims may or may not fit on lowered cars.

Offsets shown are positive.

Offset is measured from the wheels center line to the mounting surface.


This post has been edited by WannabeGT4: Jan 11, 2006 - 5:18 PM

[WannabeGT4]

I added the offsets per wheel width for lowered cars. Would someone like to double check my math? I'm pretty sure it's right but a second opinion would be nice. And if anyone has 8.5" rims on a lowered car would you please chime in and let us know what offset you're running and if you have any clearance issues.