![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) ![]() |
For those of you who have swapped your 7A out and a 3s in. Do you still have power steering? Did you have to make some custom fittings to work, or did the fittings that come on the 3sgte engine work with USDM rack and pinion?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) ![]() |
I think I have all the parts, I have these little figure 8 spacer thing. I'm not sure if its from the clip or from my st.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) ![]() |
QUOTE(Rjb23 @ Jan 15, 2006 - 5:20 AM) [snapback]378862[/snapback] I think I have all the parts, I have these little figure 8 spacer thing. I'm not sure if its from the clip or from my st. Yeap, that sounds right. Basically, you put the figure-8 things into the holes on one side, and on the other side you put the matching round bushings. I think the figure-8s go on the top. And there should be a metal bushing that goes inside each rubber hole to hold it together... Hopefully that makes some sense... lol... -Doc -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 4:12 PM |