![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Apr 23, '05 From kent Currently Offline Reputation: 0 (0%) ![]() |
right i have trawled for weeks now to find out how to get the st205 IC pump to run constantly. i know i could just put a live feed and earth to it and run it off a switch but its my understanding that its connected to the ecu and will therefore put the engine check light on. Someone please help me...!!!!!
oh and for a nice easy mod on the stock st205 chargecooler clean out with petrol or a very high quality de greaser and apply heat shielding to the underside and you will see charge temps drop dramatically.... i was seeing 50-55 deg centigrade at 1.1 bar of boost and a ambient temp of about 7degrees centigrade, i am now seeing 30-35 at the same boost pressure and same ambient temp and i am yet to finish the heat shielding properly. NOTE when you flush the chargecooler, if there was a fair amount of oil in there it will smoke heavily as the deposits gradually work their way out. ![]() ![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) ![]() |
I found this scan to be quite helpful as well:
http://www.st205.net/techinfo/205turbocircuit.jpg Go ahead and try it and see if it works without throwing a code. If you do get a code I'm sure we could figure out something else. -------------------- ![]() Project ST204.5 99.88946% complete... |
![]() ![]() |
Lo-Fi Version | Time is now: August 1st, 2025 - 12:37 PM |