![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 17, '04 From California Currently Offline Reputation: 20 (100%) ![]() |
Last night i was finishing up on the last stretch of the swap and i put in the clutch fluid in. I am having a problem with the shifting. 1st &2nd gear will go in too easy, even without the clutch pushed in for some reason. 3rd, 4th, have a hard time going in. 5th and rev. are extremely hard. It almost feels as though the clutch does not exist. Its an ACT street puck and pressure plate. I did bleed the slave cylinder as well
This is all in need to the finish the swap, i appriciate the help. |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 21, '05 From dallas Currently Offline Reputation: 3 (100%) ![]() |
what about a tranny from the ss3, the one that comes with a beams motor. Should i look for st205 shifter cables too?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(sugarfree @ Jan 20, 2006 - 9:57 PM) [snapback]381590[/snapback] what about a tranny from the ss3, the one that comes with a beams motor. Should i look for st205 shifter cables too? No... cause that tranny is the same series tranny (same box, different gearing/diff) as the Stock GT... The e153 is a completely different tranny. -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 2:04 PM |