 A lot of 'Ifs"., 7AFE 6 speed |
 Jan 20, 2006 - 5:49 AM
|
 
|
 Enthusiast  Joined Aug 18, '04 From Silverdale, WA Currently Offline Reputation: 0 (0%)  |
Ok if someone wanted a six speed to go with the 7AFE what would be the trans to use and what would be the parts needed to convert? I have heard that there is a 4AGE transmission that will fit but it is so hard to find or just expensive. Mainly what clutch and flywhel combo would you go with and what axles would fit.
|
 |
Replies
|
Jan 20, 2006 - 8:17 PM
|
|
|
Enthusiast Joined Aug 18, '04 From Silverdale, WA Currently Offline Reputation: 0 (0%) |
QUOTE(WannabeGT4 @ Jan 20, 2006 - 9:24 PM) [snapback]381580[/snapback] So according to this I would need to find an E51 transmission. Is there a C60 transmission and is it a six? QUOTE(Kwanza26 @ Jan 20, 2006 - 10:59 PM) [snapback]381607[/snapback] Stock ST axles and clutch kit should work just fine. The input shafts *might* be different, but more than likely it's the exact same thing as the stock ST. Do you know for sure? I know not many ppl here don't put much into thier 7A's but this might be cheaper than just doing a full blown 3SGTE swap for $2000 just for the front clip and counting that I don't have a shop to hold the process. |
|
Jan 20, 2006 - 8:39 PM
|
|
 Enthusiast Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) |
QUOTE(bindertch @ Jan 21, 2006 - 1:17 AM) [snapback]381667[/snapback] QUOTE(WannabeGT4 @ Jan 20, 2006 - 9:24 PM) [snapback]381580[/snapback] So according to this I would need to find an E51 transmission. Is there a C60 transmission and is it a six? QUOTE(Kwanza26 @ Jan 20, 2006 - 10:59 PM) [snapback]381607[/snapback] Stock ST axles and clutch kit should work just fine. The input shafts *might* be different, but more than likely it's the exact same thing as the stock ST. Do you know for sure? I know not many ppl here don't put much into thier 7A's but this might be cheaper than just doing a full blown 3SGTE swap for $2000 just for the front clip and counting that I don't have a shop to hold the process. No, the E51 isn't a six speed. You have two options. 1. Get a C160 from a JDM Corolla Levin, they come attached to SOME blacktop 4AGE 20Vs. That will bolt right in and should use the same axles. I don't know for sure. 2. Get a C60 from a 2000 and up Celica GTS, have the bellhousing swapped with an A series (yes, it can be done), and use 6th gen Celica GT axles. They *should* work. -Doc This post has been edited by Dr_Tweak: Jan 20, 2006 - 8:44 PM -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
Posts in this topic
bindertch A lot of 'Ifs". Jan 20, 2006 - 5:49 AM
WannabeGT4 Good information in this thread:
http://www.6gc.ne... Jan 20, 2006 - 4:24 PM Supersprynt Probably a 7a disc & flywheel with a 4a presur... Jan 20, 2006 - 4:25 PM Kwanza26 Stock ST axles and clutch kit should work just fin... Jan 20, 2006 - 5:59 PM Kwanza26 I was reffering to the C160 from the AE111 Levin w... Jan 20, 2006 - 10:08 PM bindertch Thanks Doc. I wil be looking into this if I get a ... Jan 20, 2006 - 11:18 PM Dr_Tweak I think it's '98 to '02 but I'm no... Jan 20, 2006 - 11:27 PM JoKeRkId613 The C160 tranny can be found in the AE-111 LEVIN B... Jan 20, 2006 - 11:52 PM Dr_Tweak If I recall that was for a 4E engine though, out o... Jan 21, 2006 - 12:13 AM Hanyo how do you swap out bell housings?
just a general... Jan 21, 2006 - 4:18 AM Dr_Tweak http://www.vvt-i.net/forum/showthread.php?t=5232 Jan 21, 2006 - 4:24 AM
Hanyo QUOTE(Dr_Tweak @ Jan 21, 2006 - 1:24... Jan 21, 2006 - 4:24 AM JoKeRkId613 doc, the one i saw on ebay was attached to a 4a bl... Jan 21, 2006 - 12:09 PM lilsteeg i have seen them on ebay with the blacktop and i w... Jan 21, 2006 - 1:21 PM FallenHero they are attatched to the 4a blacktop because it i... Jan 23, 2006 - 11:18 PM bindertch I guess another question for the people that have ... Jan 24, 2006 - 7:37 PM st_celica_killer well from reading this could it be done trying to ... Jan 24, 2006 - 10:49 PM Kwanza26 QUOTE(st_celica_killer @ Jan 25, 2006 - ... Jan 24, 2006 - 10:57 PM st_celica_killer you got pm anywayss
well i just wanted to try ho... Jan 25, 2006 - 1:19 AM Dr_Tweak QUOTE(st_celica_killer @ Jan 25, 2006 - ... Jan 25, 2006 - 1:24 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 3rd, 2026 - 3:19 PM |