![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 9, '05 From Charlotte Currently Offline Reputation: 0 (0%) ![]() |
A while back I had made plans to do this and Kwanza hit me with a few questions that I had to look into such as the crossmember and steering system, well I checked around and the F-Body Camaro seemed to be a good candidate for parts without having to make all of my parts from scratch. Well long story short I picked up a Camaro a couple of weeks ago and also got a running (and smoking) RX-7 FB for good measure (and $400). The Camaro is in to good a shape to be tearing apart so I will use it as a measuring board and see what comes about. It might take me forever but the thing is getting done regardless if I stick to my original parts plan or not.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jan 22, '06 From Melbourne, Australia Currently Offline Reputation: 0 (0%) ![]() |
fair enough. It was my point too, until it became no longer worth it to work on the 'rolla.
Good luck with your job though, if you go ahead ![]() ![]() -------------------- www.tangcla.com - photography
Canon EOS 5D Mark II | EOS 1D Mark II N | 16-35mm f/2.8L |24-70mm f/2.8L | 70-200mm f/2.8L IS 15mm f/2.8 fisheye | 85mm f/1.8 | 100mm f/2.8 macro | 580EX-II x2 |
![]() ![]() |
Lo-Fi Version | Time is now: June 8th, 2025 - 11:03 AM |