7AFTE ready, but dont get the turbopressure lower then 1.2 Bar. Options

[Conwa]

Yes, the installation of the turbo is done!
Everything is working fine.
Doesnt leak any oil or cooling fluid.
little leak on the exhaust manifold but thats it.

I installed a missing link valve from a Honda between the map sensor, but dont know its working because i got the following problem:

When im starting the engine its all fine, but when riding the turbopressure begins very quickly and raises till 1.2 Bar!

I dont have a Actuator on it, because the guy the made en provided the turbo made a bolt that can be adjusted, the problem now is when i adjust it, it doesnt make big difference in turbopressure, it keeps getting to high.

I gonna look for a Actuator now, to find out this is the problem.


I cant drive it now, because the boost begins when giving 1/4 throttle and raises quickly till 1 Bar.


This post has been edited by Conwa: Jan 29, 2006 - 9:00 AM

[wuzup43215]

the wastegate, if it was electronic might not be woring right, now that you changed it. you must get one. you should only boost like at about 10 or 11 psi on a stock motor for a daily driver.