smallport 4A-GE engine question, please help Options

[94STcoupeKyle]

This question is about the throttle cable switching from the 7a to the smallport 4A-ge that i just picked up

the throttle from the 7a is on the opposite side of the 4a so i was just wondering how you get the cable to the other side. Thanks


and if you can post pictures of your 4a that would be helpfull.

o and will the power stearing pump from my st bolt up to the 4a?


Thanks

This post has been edited by 94STcoupeKyle: Feb 2, 2006 - 7:49 PM

[Kwanza26]

Your powersteering pump won't work without some custom brackets. The 4AGE mounts the powersteering pump on the exhauts side, the 7AFE mounts it on the intake side. The 4AGE mounts the alternator on the intake side... the 7AFE on the exhaust side. You cannot swap over the 7A's pumps because the 7A mounting points are different from the 4AG. As for the throttle cable... the stock one might be too short. You can source a longer throttle cable from an early 90's Tercel, which should bolt-in and be long enough.