![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
When im runing 7 psi everything is fine. but as soon as get up to like 10 11 psi my eninge gets all wacked out.
at 10 11 psi it makes a really bad sputtering sound, jerks around and loses power. Is this the 2 bar map sensor doing that boost cut, is it cutting fuel? i have an mbc on it because before the turbo was only doing like 4 psi. I had to take the cap off the nipple on the second pipe of the waste gate to get it to do 7 psi. Now i have it caped off with the mbc set at 7 and have problems with it when i get up int he 10 psi range. This post has been edited by urbandork: Jan 30, 2006 - 3:32 PM |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
craig, you said on AIM you had to ADD fuel up top?
somthing is really wrong if that is the case, with the 440cc injectors your running you have pleanty of fuel, you shouldnt have to be adding more in. 440cc injectors are good for 270hp. your nowhere near that. your having some kind of fuel supply issue. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: September 22nd, 2025 - 4:10 PM |