![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
When im runing 7 psi everything is fine. but as soon as get up to like 10 11 psi my eninge gets all wacked out.
at 10 11 psi it makes a really bad sputtering sound, jerks around and loses power. Is this the 2 bar map sensor doing that boost cut, is it cutting fuel? i have an mbc on it because before the turbo was only doing like 4 psi. I had to take the cap off the nipple on the second pipe of the waste gate to get it to do 7 psi. Now i have it caped off with the mbc set at 7 and have problems with it when i get up int he 10 psi range. This post has been edited by urbandork: Jan 30, 2006 - 3:32 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
manny. although im adding that much fuel most of the time ill be in the 10:1 range. For some reason its weird cus it seems that around 4k + the engine gets a lot of fuel. Ive tried taking fuel out but sometimes it acts up and leans out a lot.
im in the process of changing the fuel filter which has over 30k miles on it that i know of. will report back after. |
![]() ![]() |
Lo-Fi Version | Time is now: September 22nd, 2025 - 4:11 PM |