![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
When im runing 7 psi everything is fine. but as soon as get up to like 10 11 psi my eninge gets all wacked out.
at 10 11 psi it makes a really bad sputtering sound, jerks around and loses power. Is this the 2 bar map sensor doing that boost cut, is it cutting fuel? i have an mbc on it because before the turbo was only doing like 4 psi. I had to take the cap off the nipple on the second pipe of the waste gate to get it to do 7 psi. Now i have it caped off with the mbc set at 7 and have problems with it when i get up int he 10 psi range. This post has been edited by urbandork: Jan 30, 2006 - 3:32 PM |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
im not concerned with what your gauge reads.
if you have to add fuel to make it rich, somthing is wrong. you already have way more fuel than you need available, you should not for any reason be having to add more up top. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: September 22nd, 2025 - 4:11 PM |