3sge with 3sgte after market piston and rods, I need help on the block Options

[funnys_tears]

hey i got question about 3sge and 3sgte,
will i run out of oil and it mess up my rob bearing and main bearing, it making noise like knocking, but
"What iF i put 3sgte low compressure after market piston and rod into the 3sge block can that able to work, is that gonna have any problem with the block and does the compressure make any difference, or gonna be the same.. i haven't done anything like this put 3sgte piston into 3sge block,.. how about the head of 3sge, can i still use the 3rd 3sge head on the 3sge block but with 3sgte after market pitson and rod, will that change the compressure...can any get me the information of that.. aright thank..[b]

[funnys_tears]

welp i guess it must work then.. but the hight compression head as 3sge are not the same as 3sgte head.. don't the 3sge have bigger cam shaft and bigger valve knock. but the cam gear are the same wight..

but i like to know how many can i boost on turbo..
but i using the 3sge beam intake mantifold on the 3rd genration head. but i hope it doesn't make any different.. from the hp,

so how many hp u got on your 3sge block with trubo charge..scothaniel

welp do u know where i can find the aftermarket hight compression piston at..
for the 3sge block...