![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
at least its a 5th gen owner. -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) ![]() |
well the anser is no it was not tested other then feel.
It is however holding your had over the outlest end wile its running was a good way to tell it pushes a lot of air. also I dont know if you guys have seen the fan blade on it, its not a conventional propeller that has massive restriction because the motor is in the way, its a rotary kinda fan (probably using the rong turm but its a fan that pushes the air horazontaly from the fans center so there is no restriction of the motor, and has a good 30 blades on it verticly from the center. -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 23, '05 Currently Offline Reputation: 4 (100%) ![]() |
QUOTE(creis @ Feb 12, 2006 - 8:15 PM) [snapback]392813[/snapback] well the anser is no it was not tested other then feel. It is however holding your had over the outlest end wile its running was a good way to tell it pushes a lot of air. also I dont know if you guys have seen the fan blade on it, its not a conventional propeller that has massive restriction because the motor is in the way, its a rotary kinda fan (probably using the rong turm but its a fan that pushes the air horazontaly from the fans center so there is no restriction of the motor, and has a good 30 blades on it verticly from the center. ok lets get this straight once and for all. it doesnt matter how much the air a fan can push in unrestricted air(so holding your hand in front of it isnt going to be a good indication if it will be helpful). like the article i posted above witht the kids trying to use a marine blower. it might be able to blow 250 CFM in free air, but it wont be able to produce a significant pressure gradient becuase its only rated at 3.5amps (approx 42watts). imagine placing the output of a fan (or any compressor whether it be a displacement type or cetrifugal) to a closed container. as pressure builds, the air is trying to push its way out against the fan. the fan rpm will slow as pressure builds. it requires a high power fan and a properly desinged housing/compressor to maintain a significant pressure gradient. QUOTE(creis @ Feb 12, 2006 - 8:23 PM) [snapback]392823[/snapback] ^ I'v read that, I was not impressed, the thing is kinda a crapy design as far as the fan goes, but 10hp is respectable. why arent you impressed? an axial fan has no inherent disadvange of a centrifugal fan. 10hp for 300 bucks is nice value in my opinion. This post has been edited by celicaST: Feb 12, 2006 - 11:01 PM -------------------- ![]() I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside. |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 4:18 PM |