Door Locks, HELP! Options

[snapshotgt]

Hello,

Well, I need some expert advice. I think I have fried my "Door Control Module" ...but I don't know for sure...here is what happened:

The locks started to unlock/lock very fast (I could not stop it btw...), and after about 20 secs of this, the locks came to a halt, right side first, then the driver’s side. The clicking continued (from the DCM in the dash) until I took apart the lower part of my dash and unplugged/uninstalled the module. Prior to unplugging the module, the locks did not work (between the time they stopped clicking back-and-forth, and when I unplugged the module)

Does this sound like I fried my DCM, or something else? Please let me know what you guys think.

Thank you for your time and help.

~snap

Edit: The locks will work manually one each side, but the drivers side bottons don't. (The drivers side botton stoped working when this whole thing started)

This post has been edited by snapshotgt: Feb 13, 2006 - 4:58 PM

[Cutrara]

I've done stuff like that before. While diagnosing an electrical problem I was having, I blew out all 4 headlights, my windshield wiper switch and my power window motor.

Good luck

[snapshotgt]

I've done stuff like that before. While diagnosing an electrical problem I was having, I blew out all 4 headlights, my windshield wiper switch and my power window motor.

Good luck

Exactly, i was messing with the alarm, and it all went to hell once i did some stuff i should not have so i have learned my lesson

...i have pm/posted to the Celica_At_GT...hopefully i can get a-hold of him before his car is taken...

~snap