![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 21, '05 From dallas Currently Offline Reputation: 3 (100%) ![]() |
I know its the same as a GT tranny, and i THINK i saw this once here. I tried to look for it at mr2oc. but i cant find it either. Im lookin for the gear ratio for this tranny.
This is a little off topic, but im plannin to buy cams in future and unfortunatley, TRD carries the ones i need and they are expensive, as well as way too aggressive. What do you guys think about a 280 combo with about a 12lift? Wouldnt be a good idea for a street car would it? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 13, '02 From Blairstown, New Jersey Currently Offline Reputation: 6 (100%) ![]() |
The ratios are very very close, if not exactly the same. If somebody knows the exact difference structurally or ratio-wise between the two then speak up, but I know that the two are almost identical. If you're talking the SS3 tranny, Jeff aka defgeph uses that tranny with his 3SGTE and his ratios are the same as my GT determined by using speed relative to the RPMS.
As for the ratios, if you look on the 6GC homepage theres a link titled information. You'll find info on the ratios under that section. Also, are these cams for your 5SFE or another motor? I know that guys on MR2OC use Webcams brand camshafts alot with success.....just go on their N/A forums and you'll find the info stickied. ![]() -------------------- 3rd gen ST205 3SGTE - Alive and boosting. |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 6:18 AM |