accord cai for gt (pics posted), done! also works for st Options

[j0e_p3t]

does the accord cai mod work for st's also? i assume it would take a lil more modifying cuz the throttle body is farther forward, if it'll even work at all. have any st drivers tried it?

This post has been edited by j0e_p3t: Mar 12, 2006 - 5:09 PM

[j0e_p3t]

what do you really wana know, can you get an accord (year?) CAI on a st celica?

any CAI can be maid to fit all you need is a sharp angle peace like an L with the short end feeding into the throttel body. (granted the diamitar needs to match or have a pipe diamitar reducer.

yeah, can i get the 90-93 accord cai to fit an st like they do on gt's in the sticky section. but whatever, i guess i'ma go for it. it should work right? if not, i'm gonna make it work... unless someone says otherwise.

You can make your own.
Use 2.5 inch or 3 inch aluminum intake piping

For a 3 inch system
You'll need from the throttle body

silicion adapter 2.5 to 3 inch
-
90 degree bend, end pointing towards the bottom of the radiator
-
silicon adapter
-
Straight pipe
-
silicone adapter
-
straight pipe
-
silicone adapter
-
90 degree bend, end pointing towards the fender
-
Air filter

and of course clamps to hold eveything together

i thought about making my own like that or like in the how-to section, but the 90-93 accord cai is cheaper and seems easier to do... unless it doesn't fit and i waste money.

Bump, plus a question. I was reading the sticky for the injen intake on the st, do you follow that for the gt when installing or is there a difference? Cuz if there is then we need a sticky for the installation on the gt. Thanks

Yet

yeah, just follow those directions. its pretty simple install, nothing complicated about it.

This post has been edited by j0e_p3t: Feb 25, 2006 - 4:36 AM