![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 6, '06 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
ok this is what is going on. i have a 94 celica st (7afe) and the #1 cyl. is not firing. Fuel is getting to it, there is compression (250 psi), there is a spark, but when i remove the spark plug and place it in the boot for seeing if there is a spark by grounding it to the block, it fires from the threads!!! i have changed the spark plugs, and i have swapped them with other cylinders. i have swapped wires. then today i jumped the diagnostic port t1 and te1, and a code flashed. the code is continual flashing, what could this cody be, and what is my problem. Please help. thanks
|
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 6, '06 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
maybe that 250 psi is a little high, maybe it was read wrong. i am grounding the spark plug to the bolt on top of the valve cover. also yesterday i ran the car for about 5 minutes with the dead cylinder, and there wasnt any gas on the plug. but when i placed my ear right next to the injector, i can hear it opening and closing. Now i am thinking that it might be a fuel problem. BUT the other 3 cylinders are getting fuel. hmmmm leave me some feedback. Thanks
|
![]() ![]() |
Lo-Fi Version | Time is now: June 18th, 2025 - 11:35 PM |