 TRD Quickshifter |
 Jun 17, 2003 - 12:01 AM
|
 
|
 Enthusiast  Joined Feb 17, '03 From Adelaide, South Australia Currently Offline Reputation: 0 (0%)  |
Are there any differences between the quickshifter kits from the US and Japan
ie. could I buy a quickshifter kit from the US and install it in my RHD ST204 without any problems?? |
 |
Replies
|
Jun 17, 2003 - 3:23 AM
|
|
 Enthusiast Joined Sep 5, '02 From Phoenix, AZ Currently Offline Reputation: 0 (0%) |
I don't think you can.
Easiest way to tell is this. When i installed mine, there were 2 cables i had to disconnect from the original setup. One was in the middle connected to the shifter bar. The second was on the left side of the housing. Just pop off your shifter boot and take a quick look. If the cable on the side is on the right side then your screwed and need to purchase a Jap TRD shifter set. If it's on the left then your good as gold! Trust me when i say that it matters which side the cable is on. The housing can only be put in 1 way so don't think that turning it around will fix your problem. |
Posts in this topic
The_Argon TRD Quickshifter Jun 17, 2003 - 12:01 AM
The_Argon *runs out to rip bits out my celi*
One in the cen... Jun 17, 2003 - 4:30 AM KAMiX I don't think the bend will be a problem - I d... Jun 17, 2003 - 9:47 PM SiKBOY The TWM shifter for the 6th Gens has a bend to the... Jun 18, 2003 - 2:01 PM Milds3vn Hey Argon, I told you in the other thread but its ... Jun 18, 2003 - 6:47 PM The_Argon I realise this and as much as I would like to get ... Jun 18, 2003 - 8:03 PM KAMiX Hey erm. Maybe this is a different shifter? SiKBOY... Jun 18, 2003 - 9:32 PM Neipas09 I saw a TRD quickshifter for the ST205 on ebay lik... Jun 19, 2003 - 12:26 AM KAMiX ^^ Really? So the TWM is exactly the same as the T... Jun 19, 2003 - 3:36 AM The_Argon QUOTE (kamixZR @ Jun 19, 2003 - 5:20 PM)^^ Really?... Jun 19, 2003 - 4:55 AM SiKBOY Ok guys. I got it. Kamix, I originally asked for t... Jun 19, 2003 - 8:58 PM Milds3vn It doesn't hit the e-brke but it comes close, ... Jun 19, 2003 - 11:10 PM KAMiX Thanks for the excellent post SiKBOY.. very helpfu... Jun 19, 2003 - 11:58 PM SiKBOY Hm, I dont know exactly where you guys are situate... Jun 20, 2003 - 12:57 AM
hata QUOTE (kamixZR @ Jun 19, 2003 - 12:50 AM) ^^ Reall... Jun 20, 2003 - 5:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 14th, 2026 - 2:55 PM |