1MZFE Swap Checklist (With Prices), Looking for feedback Options

[Dr_Tweak]

6th Gen Celica GT Manual, 1MZFE Swap

1MZFE engine set, local $500
Clutch kit $150
Fuel pump $100
Misc $1000
Labor $1000 - $1400
$2750 - $3150

GT Automatic, add:
GT Tranny $350
Manual conversion parts $300
Labor $300
$950

$3700 - $4100

ST Manual, add:
GT cables, axles, mounts $500
GT Tranny $350
Labor $100
$950

$3700 - $4100

ST Automatic, add:
Axles, mounts $500
Tranny $350
Manual conversion parts $300
Labor $400
$1550

$4300 - $4700

Manual, E153 Tranny
Tranny $550-$900
ST205/MR2/Camry Axles $300
ST205 or custom mounts $200-$400
Clutch kit (add) $50
Labor $100
$1200 - $1750

$3950 - $4900

Auto, E153 Tranny
Tranny $550-$900
ST205/MR2/Camry Axles $300
ST205 or custom mounts $200-$400
Clutch kit (add) $50
Manual conversion parts $300
Labor $300
$1700 - $2250

$4450 - $5400

Add for maintenance/tune up:
Parts and labor $800

[GMan]

> post Feb 24, 2006 - 2:37 AM
> FORGMANN
> From cincinnati
> hey,

Hey FORGMANN;

> just in case anyone is interested i will have a hybrid 1mz/3mz available soon ..
> i seriously thought about keeping 3mz and doing a twin turbo v6 set up in my st205

Have you test fitted a V6 into an ST20# chassis ?
There was talk of the rear ex manifolds hitting the firewall in an ST18# set up.
The rear cylinder bank will not clear the rear drive shaft either. Maybe using a
Highlander/rx300/Sienna v6 set up ? Would be an interestin swap.

> but with a lot less time and money i can make over 300hp no sweat with 3sgte ..

Easliy.

> besides i am sure i would have been asked why i jacked with st205 so i will stay with orginal motor ..

Since the car is not native here only an enthusiast would Know/care ?
Plus any v6 in a 6th gen would be Unique. Let alone a turbo 4wd one. :-)

> good luck swappers ...!!

The fwd swap is doable. AWD has yet to be done by anyone.
I think it would require a Lot more than luck.

Regards;