New Product from DCW, Shifter panel Dual gauge pods + Shift boot Options

[doGGy]

Well, i had this idea floating around long time ago (and i got this Idea from Chris Coomer he was the first one with the single Shfter gauge pod ), when i still had my ST. Now it became reality.
I have 10 of the first product made right now, and pretty soon these will be availible for everyone, right now im only waiting for the leather shop to finish up all the shift boots.

It supports 2 52mm gauges, will be painted with structurical paint to match the graines and color of the stock black plastic. Fitting it will be just like 2x2, im supplieng special 2 side adhesive fabric tape with can be reused 100 times - so removing / placing it back will be easy.

Here are sneek peek pics of the actuall product - in these pics the color of the pods is different so dont mind it still Finished product will be just like stock plastic.

Later on the run these pods will be availible along with DCW leather shifter knobs, same black leather/red stiching (btw - shifter boots are from natural leather).











Price is still not fully set - but as for now i can say what these will be around 80-100$ shipped along with the shift boot.

Thanks,
Romas

This post has been edited by doGGy: Mar 7, 2006 - 12:35 PM

[Supersprynt]

Romas did you ever think about doing a 60mm 3 gauge pillar to expand our choice on just the Lotek 52mm?

Or is that Apillar 60mm?

[doGGy]

Romas did you ever think about doing a 60mm 3 gauge pillar to expand our choice on just the Lotek 52mm?

Or is that Apillar 60mm?

Yes Eric i thought about this... Might even try to make 60mm A-pillar pod, and include 3 60>52mm spacers for people with smaller gauges.

Romas im totally in for one of these, but i fear a problem with short shifters.

No at all - in the pics - shifter is about 30% shorter then stock, and hands aint hitting the gauges.