TRANSGO A245E-HD2 HIGH PERFORMANCE SHIFT KIT TOYOTA, This sounds too good to be true. Options

[Bitter]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...%3AAAQ%3AUS%3A1


Hello,

These kits have a few different spings, drill bits, & other micsellaneous parts that go in the valve body. This comes with 11 pages of instructions to make all of the modifications. All changes are just inside the pan, so it doesn't need to be out.

Thanks,

Hello, I'm new here and I have a 1993 Geo Prizm 7A-FE with the A245E transmission. I haven't found any good iinformation about that shift kit and someone suggested that I try asking about it here since I do have the same drivetrain as the '94 Celica and possibly some '95 Celicas. Does anyone here know anything about it or have any opinions?

This summer I am due to drop my trans pan and clean the filter/magnets and check the clutch packs and bands, I plan on doing this along with the 120K timing belt and putting on a new waterpump (I'm not sure how long they typically last on the 7a-fe but better safe than sorry I would think).

[Bitter]

well when i emailed the seller asking more about it gave me the little snippet quoted below the ebay link.

it SEEMS to be some stiffer springs and larger passages to allow fluid to flow faster/in more volume and the springs to close the hydrolics faster.

my knowledge about the inner workings of the automatic is somewhat limited but with my GF's help (shes taken auto trans class, i havent yet) i could probably do the install. im just wary because thats a cheap price and the parts im messing with arent as cheap, nor is a new trans if something breaks off and grinds up into the fluid and ruins some bearings.



im pretty sure the automatic ST has the same transaxle that i do, the C52 is a 5spd toyota transaxle shared with the mr-2 and probably a few other toyotas.