4age Cam timing question, what to do? Options

[94silverst]

What do I do about the adjustable cam timmer on the new engine if I'm using the 7afe ECU? Is there anyway to hook it up so it works right?

[94silverst]

Well, I'm swaping the 4age for the 7afe just like you did. However, when I hooked up the 4age ECU nothing ran, so I hooked the 7afe ECU and it started and ran for a while so I decided to use the 7afe ECU with the 4age engine. Now, the cam timmer in on the front of the engine above the power steering. I'm sure you know what I'm talking about (if you need I can post a pic). Anyway, the 7afe wiring harness does not include the cam timming unit (because it didn't have one). I has two wires, I'm guessing power and ground, which comes on around 4500 RPM i've been told. So what do I do about it? I obviously want to use it but don't know how I should go about it. Coomer, what did you do? did you use the 4age ecu or the 7afe and if you did use the 7afe how did you hook up this unit. Any info on this would be very helpful on this! Thanks!!