![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) ![]() |
We just completed swapping her all the hoses and stuff are connected.... I think..
This is from a 6gc with a completed swap... I did a auto to manual swap, does it matter if I connect the park neutral thing in order to start the car? If so... where is that wire at? When I turn the key, everything sounds normal... but the starter doesn't turn over... Please help... I'm thinking it's something with the wiring. I'm stumped. This post has been edited by Chanh55: Mar 22, 2006 - 5:23 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
ok check this also (this was my promblem)
where the main harness from the motor plugs into the underside of the engine comp. fuse box. there should be a white a clamp that swings over the top of the harness to hold it in place. if that piece isnt clamped all the way down. you wont have a good ground and only a few things will work. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 7:15 PM |