![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 6, '05 From Fort Worth, TX Currently Offline Reputation: 0 (0%) ![]() |
Well I'm installing my OEM Fog Light "push" Switch I got on ebay- Switch located beside diver side vent. Its of of a ST202. I figured its alot cleaner look than after market switches. Anyways, I ran into some confusion on how to wire it. There are four wires. But the wiring (not stock) leading to my fogs now only consist of 2 wires- well at least from a quick glance under the dash. However, the wiring was from after market fogs (later I just hooked up OEM fogs using the same wirring) came with a light up switch (which I did not use). So I think the wiring has capability of lighting up a switch (I think).
Need some direction... Does anyone know what each wire does? Can I neglect a couple of wires? here's a pic of the OEM wiring from the button. ![]() -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 27, '04 Currently Offline Reputation: 14 (100%) ![]() |
in my experience... green is usually the power... white and black is ground..
-------------------- ~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 1st, 2025 - 2:09 PM |