![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) ![]() |
We just completed swapping her all the hoses and stuff are connected.... I think..
This is from a 6gc with a completed swap... I did a auto to manual swap, does it matter if I connect the park neutral thing in order to start the car? If so... where is that wire at? When I turn the key, everything sounds normal... but the starter doesn't turn over... Please help... I'm thinking it's something with the wiring. I'm stumped. This post has been edited by Chanh55: Mar 22, 2006 - 5:23 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 21, '03 From Pennsylvania Currently Offline Reputation: 3 (100%) ![]() |
The easy way to do it.... i am guessing you will not be able to read that diagram so just do the following.
check on these 3 wires... ![]() Plug IG2#3 goes to Plug II2#10 Plug IG2#4 goes to Plug II1#12 Plug IG2#12 goes to Plug II1#13 DG -------------------- ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(DG_Performance @ Mar 20, 2006 - 10:14 PM) [snapback]410815[/snapback] The easy way to do it.... i am guessing you will not be able to read that diagram so just do the following. check on these 3 wires... ![]() Plug IG2#3 goes to Plug II2#10 Plug IG2#4 goes to Plug II1#12 Plug IG2#12 goes to Plug II1#13 DG I love you man! ![]() I'm looking at the diagram with all the connectors/ plugs, which one is II1? Is that connected to the ECU or is it one of those ones with the 3 verticle connectors near the ECU? This post has been edited by Chanh55: Mar 21, 2006 - 1:18 AM |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 7:17 PM |