![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined May 23, '05 From Sauga Currently Offline Reputation: 0 (0%) ![]() |
Having a problem with my axles I have mr2 inners & alltrac outers, they seem to be too short number one, and number 2 is I don't know how to put them Together, every time I put them in place the balls fall into the cv boot. Can someone tell me what I'm doing wrong, or how to install them properly. I read the bgb on it I know I'm not slow but I just don't know what I'm missing. I'm installing them on a 5th gen celica
Thanks for the help |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) ![]() |
QUOTE(Green_MachToy @ Mar 2, 2006 - 12:42 AM) [snapback]401673[/snapback] Yeah - this works great! I took the outer portion that bolts up to the MR2 inner...second one off of a "spare" st185 or v6 axle. I went down to the hardware store spent 10 bucks (got extra bolts just in case). Made sure to line them up so the channel on the inside does not allow the ball bearings to slide all the way into the "spare" spacer. Made that mistake once! Bolted it up and was good to go! I've been running with mine for over a year! By the way anyone ever look at a Camry V6 axle and a ST185 - when I did, they looked the exact same. So unless they are made of different grades or something I didn't notice...they appear to be the same! Thanks this was a great note! |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 9:07 AM |