interior electrical diagram, does anyone have one? Options

[brianforster]

like for the wires going to the gauges, and the turn signal arms? all i can find is just like a general thing

[brianforster]

wow its hard to understand them basically what i have is this

marks interior harness (and thus his plug that plugs into the turn signal arm, was different than mine

so i cut it and cut my plug off so that i could just splice similar colors and i figured the non used colors were for stock fogs.

now in the process of this something strange happened:

there were 2 black/white wires with 1 silver dot on his plug and thus 2 coming from the wire loom. when i cut these i found out that there was only 1 of these wires on my plug, when i went to splice it, i found one strand of blackwhite wire laying on the floor, confused i looked into the loom and found no more black white wire, the only assumption i could make is that for some reason on his harness a black white wire with 1 silver dot came out of the plug, looped around, and went to another spot on the plug.

this , i believe, is my major problem, because with the splicing i have done both turn signals work, but no gauges or headlights light up when you turn the turn signal arm, but when you pull it back (like to flash) all 4 lights go

there is 1 wire on my plug that doesnt have a mate on his harness, a black white with 1 silver dot

this is a mess