 S-afc and Knock, Why is my knock rating high? |
 Jun 24, 2003 - 9:03 AM
|
 
|
 Enthusiast  Joined Apr 20, '03 From Chicago Currently Offline Reputation: 0 (0%)  |
So I'm kind of concerned that my engine is knocking. I just installed an s-afc and I've been monitoring knock, and have gotten numbers as high as 100 on it. It's not a consistant knock, and I can't hear anything, but it sometimes happens when I take my foot off the throttle and when the car shifts.
All I have is an Intake, Exhaust, and Underdrive pulley. I'm not leaning out the engine and I still get the knock numbers when I increase the air/fuel mixture by 10% throughout the band. I've calibrated the thing 3 times, anybody know what is up? |
 |
Replies
|
Jun 24, 2003 - 10:06 AM
|
|
 Enthusiast Joined Dec 21, '02 From Italy Currently Offline Reputation: 0 (0%) |
finally someone raply!!!
Here in Italy now have 35 degrees and 50% humidity and during day my knock sensor reaches 140 at idle after 2 hours in traffic but I have nothing hearable...During evening, when temp is much lower I have a max of 90-100 at idle......let me know your values at idle and at WOT and also the condition u're running (air temp, time running etc...) For sure my knock should be higher than your due to type of mods, anyway I'm interested to share opinions This post has been edited by edo17982: Jun 24, 2003 - 10:11 AM |
Posts in this topic
HyperDeathKill S-afc and Knock Jun 24, 2003 - 9:03 AM
SiKBOY Um, I kind of know that this is off topic, but I w... Jun 24, 2003 - 11:08 AM Supersprynt the 5sfe is very similar to the 7afe, but not iden... Jun 24, 2003 - 1:21 PM edo17982 5SFE pinouts to wire AFC are in the apexi manual..... Jun 24, 2003 - 1:33 PM SiKBOY I bought this thing in Japan and its all in Japane... Jun 24, 2003 - 1:54 PM edo17982 you should follow the diagram of the 3SFE in funct... Jun 24, 2003 - 2:12 PM west_minist My 2cents worth here!
http://www.apexi.com
C... Jun 24, 2003 - 10:00 PM HyperDeathKill Apexi.com doesn't say anything. I suppose som... Jun 25, 2003 - 12:02 AM SiKBOY HyperDeath, did you use the T4-f diagram to wire i... Jun 25, 2003 - 12:27 AM Delta_Phoenix I received my S-AFC today and the manual does not ... Jun 25, 2003 - 3:01 AM SiKBOY Yeh Im still looking which diagram to follow on th... Jun 25, 2003 - 9:38 AM HyperDeathKill I used the one that toyotacelicaonline said to use... Jun 25, 2003 - 4:41 PM SiKBOY Thanks Hyperdeathkill, I'll try and fit the ba... Jun 25, 2003 - 11:33 PM HyperDeathKill Extractors? You mean the thing that splices two w... Jun 25, 2003 - 11:59 PM kuruptedsnake ok where can i get one of these things do they hel... Jun 26, 2003 - 7:07 PM HyperDeathKill If you mean a sodering iron (the thing you use to ... Jun 27, 2003 - 1:30 AM SiKBOY I think we got a mix up. Extractors are the same a... Jun 27, 2003 - 4:28 AM SiKBOY I FINALLY got this prick in, with dodgey soldering... Jul 1, 2003 - 11:21 PM HyperDeathKill Did you calibrate your knock sensor? Hey, and whe... Jul 2, 2003 - 1:09 AM SiKBOY How do you calibrate the knock sensor? As you will... Jul 2, 2003 - 2:29 AM edo17982 ok....about knock is normal that you don't rea... Jul 2, 2003 - 5:18 AM SiKBOY I havent taken the car out on a run yet. Ive only ... Jul 2, 2003 - 5:35 AM edo17982 I suggest you this: let the engine become at norma... Jul 2, 2003 - 5:44 AM edo17982 another thing....In & out pressure is 01 and 0... Jul 2, 2003 - 7:31 AM HyperDeathKill Wait, edo are you sure about the pressure thing? ... Jul 2, 2003 - 9:09 AM edo17982 I just was remembering wrong, I set 3, sorry to al... Jul 2, 2003 - 11:45 AM HyperDeathKill Yea, anyway your english is pretty good, don't... Jul 2, 2003 - 3:20 PM
SiKBOY Edo, I have those numbers that you were after. Aft... Jul 2, 2003 - 11:26 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 13th, 2026 - 1:35 PM |