![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 5, '04 Currently Offline Reputation: 0 (0%) ![]() |
I noticed that my rear lights really rattle when my bass is up, even with a little bass you can still hear it rattleing from outside the car. Anyone have dynomat or similar mats placed in the hatch to get rid of it? If so, where did you put it at, thanks
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 28, '04 From Houston, Texas Currently Offline Reputation: 2 (100%) ![]() |
The rattle in the door is most likely the door handle bezel. That's what mine is but with a RF 15" Sub @ 500W there's not a whole hell of alot I'm going to be able to do about it.
About the washers and o-rings my guess would be to put the o-rings on the bolts (the mounting bolts for the LP) behind the liscense plate before you screw it on. I just cut up and old leather belt or foam and glue strips behind the LP and then mount it back on. That took care of that. As for the hatch I think they were talking about the black stoppers on either side in the recess where the hatch sits. They are square black plastic on both sides and they just become the stop point for when the hatch is closed. I'm goin to try and washer mine out today to see if that helps cause my hatch rattles bad. If it works I will take pics and make you a simple how-to. Should be easy enough. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: September 5th, 2025 - 3:09 AM |